Caple CR1001SS - Manual (Page 22)

22
Please note: the connection hose and the chain are part of the
installation not part of the cooker. They should be provided by
your installer and are available at most builders merchants.
The safety chain must be installed in order to:
Prevent the gas hose from being accidentally damaged when the
cooker is moved for cleaning.
Prevent the cooker from falling over if an excessive weight is pla-
ced on the open oven door.
The chain must be anchored to the wall behind the cooker, in a cen-
tral position with respect to the width of the appliance, in the fol-
lowing manner:
Firmly secure a hook “A” to the wall behind the cooker, on the same
level with the fixing points of chain “C”.
Fix chain “C” using the screws “B” situated at the back of the
cooker (fig. 49).
After having prepared the chain as above, attach in to the hook “A”.
WARNING:
The installer must ensure scrupulous observance of the above
points. The manufacturer declines all responsibility deriving
from failure to observe these recommendations.
fig. 44
Additional notes
for assembling a safety chain