Assembly complete – BDI 8200 Alcove User Manual

Page 9

Install TV with attached horizontal mounting bars to

flat panel mounting brackets at desired height by

inserting the threaded studs into key holes. Note: Flanged

nuts are provided in the Plasma Mounting Blister Pack and

must be threaded on the studs of the upper mounting bar

in order to prevent any damage to the TV.

Step 6b

Step 6c

Once the threaded posts are positioned through the key holes

and slots, lower TV into resting position. Tighten flanged

nuts on upper mounting bar.

Install the second set of flanged nuts to the threaded posts of the lower

mounting bar. Once positioned, fully tighten all flanged nuts!

Assembly complete!