BDI 6320 FORMAT User Manual

Format

A S S E M B L Y I N S T R U C T I O N S

C - 5/32" x 12mm

Phillips Screw

E - Center Caster x 1

I - Legal File Bar x 2

J - Lateral File Bar x 1

M - Adjustable

Cabinet Shelf x 1

D - Brake Caster x 5

B - Cabinet x 1

F - M4 x 37mm

Phillips Screw

G - M4 x 25mm

Phillips Screw

H - Pull x 4

L - Adjustable
Printer Shelf x 1

K - Shelf Pin x 8

FORMAT

6320

Format is engineered for easy assembly. Carefully follow this
procedure to prevent any damage.

Do not use power tools for assembly of this product.

Placement and Maintenance
Format™ Office furniture is designed for indoor use on level floors.
Clean steel parts and wood veneer with a moist cloth.

Step 1
Unpack and Identify
Unpack and identify the components at left. Note that some
components are shipped inside the cabinet. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service
at [email protected]. For all other concerns, please
contact your BDI Retailer.

Step 2

Install Casters
Carefully position

Cabinet (B) on its back side so that bottom side

is accessible, then attach a

Caster at each of the six (6) exposed

installation plates using

5/32" x 12mm Phillips Screw (C) and a

Phillips Screwdriver. Then carefully turn

Cabinet (B) upright.

Component List

Designed by Matthew Weatherly.
These distinctive product confi gurations are protected by US and
international patents, trade dress, and/or copyright laws.
BDI and Format are trademarks of Becker Designed, Inc.
All Rights reserved. ©2012, BDI
Made in Taiwan. 6320REV022312v1

A - Phillips Screwdriver
x 1

(not provided)

C x 4

E x 1

C x 20

D x 5

2 Person Task

B D I U S A . C O M C U S T O M E R S E RV I C E @ B D I U S A . C O M