BDI 6301 FORMAT - Manual

1
J - Adhesive Foam /
Magnet x 4
Pre-installed on
Upper Horizontal
Beam (F)
M - M4 x 37mm
Phillips Screw
x 4
H - 1/4-20 x 1/2" Screw
x 14
C - Glides x 4
FORMAT
6301
Format is engineered for easy assembly. Carefully follow this
procedure to prevent any damage.
Do not use power tools for assembly of this product.
Placement and Maintenance
Format™ Office furniture is designed for indoor use on level floors.
Clean steel parts and wood veneer with a moist cloth.
Step 1
Unpack and Identify
Unpack and identify the components at left. Note that some
components are shipped inside the cabinet. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service
at [email protected]. For all other concerns, please
contact your BDI Retailer.
Component List
Designed by Matthew Weatherly.
These distinctive product confi gurations are protected by US and
international patents, trade dress, and/or copyright laws.
BDI and Format are trademarks of Becker Designed, Inc.
All Rights reserved. ©2012, BDI
Made in Taiwan. 6301REV022312v1
A S S E M B L Y I N S T R U C T I O N S
B D I U S A . C O M C U S T O M E R S E RV I C E @ B D I U S A . C O M
B - 4mm Hex Wrench
x 1
A - Phillips Screwdriver
x 1
(not provided)
N - Front Kick Panel x 1
O - Back Panel x 1
E -
Right Leg x 1
K -
Pull x 2
D -
Left Leg x 1
I - Drawer Assembly x 1
G - Lower Horizontal
Beam x 1
F - Upper Horizontal Beam x 1
K - Pull x 2