BDI 6007 Sequel - Manual

1
B - 5/32” x 12mm
Phillips Screw x 20
S
e q u e l
6007 L
ow fiLe cabinet
S
equel
a s s e m b L y i n s t r u c t i o n s
bdiusa
.
com customerservice
@
bdiusa
.
com
Your Sequel Home Office Furniture is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Placement and Maintenance
Sequel Home Office Furniture is designed for indoor use on level floors.
Clean steel parts and wood veneer with a moist cloth.
Step 1
Unpack and Identify
Unpack and identify the components at left. Note that some components
are shipped inside the cabinet. The assembly workspace should be a non-
marring surface such as carpet. A Phillips Screwdriver will be needed for
assembly. For missing hardware pieces, please contact BDI Customer
Service at [email protected]. For all other concerns, please
contact your BDI Retailer.
Step 2
Install Casters
Carefully position Cabinet (A) on its top surface so that bottom surface is
up, then attach a Caster to each of the five (5) exposed installation plates
using 5/32” x 12mm Phillips Screw (B) and a Phillips Screwdriver.
Component List
D - Center Caster x 1
E - Rear Caster x 2
H - Legal File Folder
Stretchers x 2
C - Brake Caster x 2
A - Cabinet x 1
Designed by Matthew Weatherly.
‘Sequel’ is a trademark of Becker Designed, Inc.
All rights reserved. ©2009 Becker Designed, Inc.
Made in Taiwan. 6007REV121509v2
FRONT
B x 8
B x 4
B x 8
C x 2
D x 1
E x 2
F - 5/32” x 22mm
Phillips Screw x 6
G - Drawer Pull x 3
6001 6002 6005 5 6 6 6006 6 6 6007