BDI 8224 MIRAGE - Manual

1
Mirage is engineered for easy assembly. Carefully follow this procedure
to prevent any damage.
Placement and Maintenance
Mirage is designed for indoor use on level floors. Clean glass with glass
cleaner; steel parts and wood veneer with a moist cloth.
Step 1
Unpack and Identify
Unpack and identify the components at left. Note that some components
are shipped inside the cabinet. The assembly workspace should be a non-
marring surface such as carpet. For missing hardware pieces, please
contact BDI Customer Service at [email protected]. For all
other concerns, please contact your BDI Retailer.
Step 2
Remove Pre-Installed Adjustable Shelves (L)
Component List
Designed by Al Glass and Cristian Wicha.
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. ©2009, BDI
Made in China. 080709v1
M
irage
8224
a s s e m b l y i n s t r u c t i o n s
bdiusa
.
com customerservice
@
bdiusa
.
com
C - Dowel Pin x 8
F - Leg Assembly
x 2
L - Assembled Cabinet
x 1
E - Cam Fastener x 2
D - Cam Bolt x 2
G - Front Rail x 1
H - M6 x 70mm Bolt x 4
I - M6 x 73mm Bolt x 2
J - Barrel Nut x 6
Pre-installed on M6 x
70mm Bolt (H) and M6
x 73mm Bolt (I)
B - 4mm Hex Driver
x 1
A - Phillips Screwdriver
x 1
K - Center Leg x 1
N - Back Panel x 2
M - Adjustable Shelf
x 2
L