BDI 8177 CORRIDOR - Manual

1
B1 - Hex Wrench
x 1
B2 - Hex Wrench
x 1
Corridor is engineered for easy assembly.
Carefully follow this procedure to prevent any
damage.
Placement and Maintenance
Corridor is designed for indoor use on level floors.
Clean wood veneer with a moist cloth. Clean
glass with glass cleaner.
Step 1
Unpack and Identify
Unpack and identify the components at left. Note that some
components are shipped inside the cabinet. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service
at [email protected]. For all other concerns, please
contact your BDI Retailer.
For your convenience, wheel assembly is pre-installed. Wheels can
be removed if desired.
Component List
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and
international patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. ©2013, BDI
Made in China. 8177REV112014v2
C - Cabinet
x 1
G - 1/4-20 x 60 mm
Machine Screw
x 6
H - M4 x 35 mm
Machine Screw
x 6
F - Metal Rail
x 2
E - Metal Leg
x 2
D - 1/4-20 x 10 mm
Machine Screw
x 16
I - Door Pull
x 3
A - Phillips Screwdriver
x 1
L - Back Panel
x 2
K - Glass Top
x 1
J - Rubber Bumper
x 6
Removal of wheels:
Detach
Wheel Assembly from
Metal Leg (E) by removing the
Leveler and Screw.
Reinstall Leveler to Metal Leg
(E).
E
E
corridor
8177
cabinet
a s s e m b l y i n s t r u c t i o n s
bdiusa.com [email protected]