BDI 8937 AVION NOIR - Manual (Page 3)

3
assembly instructions
bdiusa . com customerservice @ bdiusa . com
Completed
base
assembly
Step 5
Install Wood Leg
Install Wood Leg (I) at rear-center edge of cabinet bottom using two
(2) 1/4”-20 x 2” Machine Screws (E) and one of 4mm Hex Drivers
(B). Wood Leg (I) must straddle the rearmost Metal Rail (G), as
indicated in drawing.
E
E
Step 6
Install Back Panel
Install both Back Panels (M) to the backside of the cabinet.
*Note: Velcro straps are included as wire management for your
convenience.
I
G
NOTE: To install first Machine Screw (E), open cabinet’s bottom-center
door to gain access to interior compartment. Once first Machine Screw
(E) is threaded into the Wood Leg (I), upright the cabinet and install
second Machine Screw (E) from cabinet exterior, near back edge of
cabinet.
Optional Flat Panel TV Mount
This BDI cabinet is compatible with BDI’s Flat-
Panel TV Mount #9970
(sold separately) , with
the following features:
attaches easily to the back of the cabinet
•
accommodates most TVs up to 60”
•
swivel allows for rotating for optimal viewing
•
allows adjustable TV mounting height
•
accepts and route cables to and from the TV
•
F
or more information, visit www.bdiusa.com