BDI 8937 AVION NOIR - Manual (Page 2)

2
assembly instructions
bdiusa . com customerservice @ bdiusa . com
3
G
Completed
base
assembly
Step 4
Fasten Base Frame to Assembled Cabinet
Carefully lay Assembled Cabinet (F) back-side down. Using one of 4mm
Hex Drivers (B), attach the completed base assembly to the bottom
of the Assembled Cabinet (F)
with 1/4”-20 x 2” Machine Screws (E) .
*Note: Each of the metal legs has levelers that can be adjusted from
inside the cabinet using one of the 4mm Hex Drivers (B).
E x 8
Step 3
Build Base Assembly
Using the Hollow Bolt Wrench (C), remove the four (4) pre-installed
Hollow Bolts (D) from Metal Leg (H). screw the
Metal Rail (G) to the
top of Metal Leg (H) with Hollow Bolts (D).
H
H
D
G
G
Detail view of Hollow Bolts (D)
connecting the Metal Rail (G) to
the top of Metal Leg (H).
D
G
H
H
Completed base assembly
NOTE: Make sure
that the larger bolt
opening on Metal Rail
(G) faces toward the
floor.