BayTech RPS Single-phase Combined - Manual (Page 17)

RPS with or without Ethernet
17
Type the number of the outlet to be changed. For example to change the name of Outlet 4, type the
number 4 at the “Enter Request” prompt, followed by . The RPS will display the following:
Type ‘N’ to keep the same name, or type ‘Y’ to change the name. The RPS will display:
Type a new receptacle name (maximum 16 characters), followed by . For example, change the
name of Outlet 4 to Router 1 by typing Router 1 at the “Enter Request” prompt, followed by . The
RPS redisplays the outlet menu with the new name to Outlet 4.
Enable/Disable Status Menu
Select “Enable/Disable Status Menu.” from the configuration menu, to enable the Status menu.
The RPS will display the option to change the current status:
Default setting is Enabled.
If this feature is disabled, only the RPS> prompt appears, else the following status menu appears.
1)...Outlet 1 2)...Outlet 2
3)...Outlet 3 4)...Outlet 4
5)...Outlet 5 6)...Outlet 6
7)...Outlet 7 8)...Outlet 8
9)...Outlet 9 10)...Outlet 10
11)...Outlet 11 12)...Outlet 12
13)...Outlet 13 14)...Outlet 14
15)...Outlet 15 16)...Outlet 16
17)...Outlet 17 18)...Outlet 18
19)...Outlet 19 20)...Outlet 20
21)...Outlet 21 22)...Outlet 22
23)...Outlet 23 24)...Outlet 24
Enter Request:
Current Outlet: Outlet 4
Modify (Y/N)? y
Enter :
Enable Status Menu (Y/N)? y