BayTech RPS Single-phase Combined - Manual (Page 16)

RPS with or without Ethernet
16
NOTE: If an outlet user’s list is changed while the user is logged in, their outlet list changes
dynamically. If enabled, an updated outlet status report will be issued. ‘Y’ means the outlet is
assigned to the user. ‘N’ means the outlet is NOT assigned to the user.
Select 1) Add Outlet(s) to assign outlets to a user. The RPS will display the following:
Type the number of the outlet to be assign. For example, if you want engineer to have access to Outlet
2, enter the number 2, followed by . If you want engineer to have access to Outlets 2, 5, and 8
enter the numbers 2, 5, and 8 separated by commas: 2, 5, 8, followed by .
The RPS Unit redisplays the Assigned Outlet Menu of the user with a ‘Y’ for the assigned outlets.
Select 2) Remove Outlet(s) to remove an outlet from a user. The RPS will display the following:
Type the number of the outlet to be removed from the user’s access. For example, if you want to
remove Outlet 2 from the engineer’s access, enter the number 2, followed by . If you want to
remove Outlets 2, 5, and 8 enter the numbers 2, 5 and 8 separated by commas: 2,5,8, followed by .
The RPS Unit redisplays the Assigned Outlet Menu of the user with an ‘N’ for the outlets NOT
assigned.
Select 3) Add All Outlets, to user access. The RPS will display the user access with ‘Y’ for all outlets.
Select 4) Remove All Outlets from user access. The RPS will display the user access with ‘N’ for all
outlets.
Select G) Change Outlet Group will display the next group of outlets to be added or removed from the
user access.
Change Outlet Name
Select “Change Outlet Name” from the main menu to change the name of the receptacles. The specific
unit type determines the number of receptacle displayed. The following outlet names appear:
-------------------------------------------------------
| User | Assigned Outlets |
| | 1| 2| 3| 4| 5| 6| 7| 8| 9|10|11|12|
-------------------------------------------------------
| root | Y| Y| Y| Y| Y| Y| Y| Y| Y| Y| Y| Y|
-------------------------------------------------------
1)...Add Outlet(s)
2)...Remove Outlet(s)
3)...Add All Outlets
4)...Remove All Outlets
G)...Change Group
Enter Request:
Enter Outlet number(s):
Enter Outlet number(s):