BayTech RPS Single-phase Combined - Manual (Page 15)

RPS with or without Ethernet
15
Type the number of the user to be deleted, followed by . The RPS will display the User Menu
minus the deleted user.
NOTE: If an outlet user is deleted and is logged in at the time, the outlet user will be
disconnected. If you delete the user in the first position, the RPS will display the following:
WARNING: If the unit has not had a power cycle or unit reset command performed recently,
before you delete the user in the first position, perform a unit reset command from the main
menu. This action will prevent the unit from having NO Admin user assigned even though the
first position user was deleted and there is a second user assigned. If the NO Admin condition
occurs, reset the unit to factory defaults.
Rename a User:
Select R), “Rename user”, from the User Management Menu, the RPS unit will display the following:
Type the number of the user to be renamed, followed by . The RPS unit will display the following:
The RPS Series redisplays the User Menu with the renamed user.
Change Outlet Branch:
Select G). “Change Outlet Group”, from the User Management Menu, the RPS displays the other
Group of outlets
Assigned Outlets
The Assigned Outlet Menu displays the outlets a user can access.
Select a user number from the User Management Menu, the RPS unit will display the Assign Outlet
Menu:
You are deleting the current admin user. The next user will become the admin user,
do you want to continue. (Y/N)?
Enter user number to rename:
Enter user name: