Basler Electric MVC301 - Manual (Page 13)

4-1
SECTION 4
MAINTENANCE AND TROUBLESHOOTING
4-1. PREVENTIVE MAINTENANCE
4-2. TROUBLESHOOTING
4-3. RECOMMENDED SPARE PARTS
A periodic inspection should be made of the unit to insure it is clean and free from accumulations
of dust and moisture. Verify that all terminal connections of the MVC-301 and the voltage regulator
are tight.
In the event of failure/defective operation of the unit, Table 4-2 provides information to determine
the probable cause of the malfunction and the solution. Refer to Paragraph 3-3 and to Figure 3-4
for the bench test procedure.
Due to a protective coating, repair/replacement of individual components on the printed circuit board
assembly should not be attempted and the complete replacement of the board is recommended.
When ordering replacement parts from Basler Electric always specify the part number, the quantity
and the description of the item.
Table 4-1. Replacement Parts List.
Reference
Designator
Part
Number Quantity Description
---------------- 9 1210 01 104 1 Printed Circuit Board Assembly
F1,F2 04592 2 Fuse, 10 A, 250 V