Basler Electric BE1-50/51B-219 - Manual (Page 14)

8 9252000981 Rev J
Outputs
Instantaneous and Timed
System circuit breakers controlled by the output contacts can be manually tripped by applying a short
across the TIME or INST MANUAL TRIP front-panel test points. Current flow in the trip circuit is indicated
by the operation of the target. The targets will not operate without adequate operating power for the relay.
Warning!
Trip-circuit voltage is present at the front-panel test points. When
shorting the test points, use insulated jumpers to avoid contact with
these voltages.
Figure 3. Functional Block Diagram
Functional Description BE1-50/51B-219/-226