D-Link SECURICAM NETWORK DCS-5300 - Manual (Page 53)

53
Configuration > Tools > Admin
Click on the Tools tab to access 4 utility screens for controlling and
administering the DCS-5300. The default screen in Tools is the Admin screen.
The DCS-5300 is manufactured without any passwords by default. This
allows the ability to access the DCS-5300 (including the Configuration) by
anyone as long as the IP address is known. It is recommended that you enter
a password to restrict others from accessing your camera.
Type a password in the New Password field to enable protection, and then
confirm the password in Confirm Password field.
This password is used to identify the administrator. You can add accounts
with
User name and User Password for other users in the Add user
section.
Using the DCS-5300 with an Internet browser
(continued)
You can provide up to twenty accounts for other users / visitors. Each account
identifies the access right. This allows multiple visitors to share the same account
of different levels. The options
Permission for I/O Control (Digital In/Digital
Out) and Permission for PT Control are provided for each account. Some
users may need to be prohibited from controlling your attached security devices.