D-Link SECURICAM NETWORK DCS-5300 - Manual (Page 132)

132
Click the Network button under the Advanced tab to set the SMTP or FTP
server settings for the DCS-5300.
In this window, enter the settings for the SMTP or FTP server to which recorded
snapshots will be sent. For detailed information about each setting, please refer
to Configuration > Advanced > Network in the section titled “Using the DCS-
5300 With an Internet Browser” (page 38). Click the apply button when finished.
Configuring Your Camera for External Trigger Based Recording
(continued)
I/O Connector (continued)
Click Network