D-Link SECURICAM NETWORK DCS-5300 - Manual (Page 102)

102
Using IP surveillance Software (continued)
Scheduling (continued)
In this area you will select the video channel that you want to set a schedule for.
Each video channel will display a name, IP address, and location. Please note
that when you switch between video channels in this area, the changes in the
schedule of the previous video channel will be saved automatically.
Primary Schedule
Schedule with Time Lines
Week Time-Line
In the figure below, Week time-line is displayed. It includes the time-line, schedule
information, and the selected day in the week.
Selected Day
Marking/Unmarking the Recording Time on the Week Time-Line
Click Result in hour time-line
There are two different time-lines: hour unit time-line and week unit time-line.
You can make your own schedule by plotting markers in all time-lines. These
two time lines are associated with each other. That is, if you make changes in
one time-line, the corresponding changes will be applied with scale to the other
three time-lines in the same schedule. Before you begin, make sure that you
select “Once” (page 100) if you want to choose the days to record on.
The corresponding changes for the markers on the week time-line will be
automatically added to the hour time-lines, which is shown above. You can
also mark and unmark the plotted bar by clicking and dragging with the left and
the right mouse button.