Baja Motorsports WD400-U Operator's Manual - Manual (Page 33)

29
CAUTION
Do not coast for long periods of time with the engine not running, and
do not tow the machine a long distance.
Even when the machine is in neutral, the gears are not properly
lubricated unless the engine is running, Towing the machine with the
engine not running could cause damage to the drive train.
Be sure to check for leaks in the gear case and keep oil up to the
prescribed level.
CAUTION
Always close the throttle while shifting gears.
Failure to close the throttle while shifting gears could cause damage
to the engine and drive train.
WARNING
Not looking behind vehicle before and while going in reverse could
be hazardous.
Failure to look behind while backing could cause the ATV to run into
an obstacle or person resulting in an injury.
Before going in reverse and while backing, look behind the vehicle
for any obstacles or people to avoid.
2WD/4WD button
2WD/4WD BUTTON
To shift the 2WD to WD, stop the ATV and press
the button in, to 4WD position . To shift the 4WD
to 2WD, stop the ATV and press button letting it
out, to 2WD position.
WARNING:
When driving the ATV and shifting 2WD
to 4WD or 4WD to 2WD, the 2WD is different from
4WD in operation. Shifting 2WD to 4WD when
driving will make the ATV encounter unexpected
control, which will increase the accident risk.