Baja Motorsports WD400-U Operator's Manual - Manual (Page 29)

25
STARTING THE ENGINE
Before attempting to start the engine, make sure to follow these steps.
1. Turn the fuel valve to the “ON” position
2. Turn the key switch to the ON position.
3. Set the engine stop switch to the “RUN“ position.
4. Apply the rear brake lever and make sure that the rear wheels are in
locking condition.
5. Press the starter button “START” to start the engine.
WARNING
The ATV could start moving as soon as you start the engine.
Unexpected movement could cause you to lose control of the ATV.
Be sure to set the parking brake before you start the engine.
WARNING
Running your ATV indoors where there is little or no ventilation could be
hazardous.
Breathing in exhaust gases from the ATV could cause severe injury.
Always run your ATV outdoors where there is fresh air.