Baja Motorsports WD400-U Operator's Manual - Manual (Page 19)

15
Fuel level Filler neck
FUEL VALVE
This vehicle has one manually operated fuel valve. There are 3 positions
“ON” position (arrow pointing down)
In this position, fuel is allowed to flow into the carburetor when the
engine is running or being started.
“OFF” position (arrow pointing left)
In this position the fuel is shut off from the carburetor. The fuel
valve needs to be placed in this position when the ATV is not in use
“RESERVE” position (arrow pointing up)
If the fuel level in the fuel tank becomes to low for the engine to
stay running while the fuel valve is in the “ON” position, turn
the fuel valve to “RESERVE”. This will allow the engine to begin
using the reserve fuel supply. You will need to re-fuel as soon as
possible. Once re-fueled, turn the valve back to the “ON “ Position
FUEL TANK CAP
To open the fuel tank cap, take the end of the
vent tube out from the vehicle body; turn the
fuel tank cap counterclockwise. To close the
fuel tank cap, turn it clockwise and close it
securely. Be sure that the vent tube securely
connects to the cap as shown
“ON” “OFF” “RESERVE”