Baja Motorsports WD400-U Operator's Manual - Manual (Page 32)

28
DRIVE SELECT LEVER
The drive select lever shifts the ATV from forward to reverse or reverse to
forward.
To shift ATV in reverse:
1. Release throttle
2. Apply brakes coming to a complete stop.
3. Shift transmission into neutral.
4. Shift drive select lever to “R” (reverse). Note: When in reverse, the re-
verse indicator light should illuminate on the console, if light does not come
on, check to see if vehicle is in first gear.
5. Check for people or obstacles behind you.
6. Open the throttle gradually continuing to watch to the rear while backing.
7. When finished with reverse bring vehicle to a complete stop and lift up on
the shift lever.
Drive select lever
Forward
Neutral
Reverse