Baby Lock ProStitcher Version 14.04.0051 (BLPS2) Instruction and Reference Guide - Manual (Page 56)

Quilt Menu 7.1
The features available within the Quilt menu are all
related to the actual quilting of designs. While any of
the sub-menus within the Quilt menu are selected, a
Run button is available to start the stitching process.
Stitch
The Stitch sub-menu gives quick access to the most
commonly used settings in case they need to be
adjusted before stitching a design (Figure 7.1). Tie
Off and Pullup settings are available here and are
explained in detail in the Settings section of this
manual. There is also a Stitch button along the
bottom of the screen. The Stitch button should be
selected in most circumstances. However, if a quilter
wants the Pro-Stitcher to run through the design
without actually stitching, press the Stitch button to
disable it. If the Stitch option is turned off, the Tie
Off and Pullup options will also be turned off. If
either the Tie Off or Pullup options are selected, the
Stitch button will also be automatically selected.
Status
If a quilter wants to know how far into a design
the machine has stitched, select Status and then
press the Run button at the bottom of the screen.
This displays the current design line segment being
stitched as well as the distance traveled (in inches)
(Figure 7.2). The distance information may be
useful in determining how much thread the design
has used. The line segment information also may be
useful during a Pause situation if the quilter needs
to scroll back to a specific line within the design to
resume quilting from that point.
Figure 7.1
Figure 7.2
7. Quilt Menu