Baby Lock ProStitcher Version 14.04.0051 (BLPS2) Instruction and Reference Guide - Manual (Page 30)

Design Menu 5.3
File Types
The Pro-Stitcher will read four file types directly:
*.hqf, *.qli, *.txt, and *.tap. Pro-Stitcher cannot
read encrypted files or *.txt files that were created
for computerized quilting systems with proprietary
formats.
Load
To load a design of one of these four file types, press
the Design menu tab on the left (Figure 5.4). Then
press the File sub-menu if it is not already selected
and press the Open button at the bottom of the
screen (Figure 5.5).
Browse to the desired design stored either on the C:
drive or on a removable disk. The different design
file types have color-coded backgrounds as follows:
*.hqf: Beige
*.qli: Light blue
*.txt: Lavender
*.tap: Pink
Loading the thumbnails may take a few moments,
depending on how many designs are stored in the
selected directory and how intricate those designs
are. While the thumbnails are being loaded, a
colored block with the name of the file type will
be visible in place of the actual design thumbnail
(Figure 5.6).
Double-tap the name of the desired file or single-tap
and then press Open in the file browser to open the
design. A prompt to Clear Area appears onscreen.
Choose Yes to clear the area or no to leave the area
as designated. Press Cancel to exit the file browser
without selecting a new design to load (Figure 5.7).
Figure 5.4
Figure 5.5
Loading a Design
Figure 5.6 Figure 5.7