Avery Dennison 9414 Equipment Manual - Manual (Page 33)

To c h a n g e y o u r p r i n t e r f r o m b l a c k m a r k t o g a p s e n s o r :
1. Measure in millimeters length of the label. Write
down this value for p
1
.
2. Measure the space between labels. Write down
this value for p
2
.
3. Convert the values to dots by multiplying the
millimeters by 8.
For example:
p
1
=20.0mm x 8 = 160 dots
p
2
=3.0mm x 8 = 24 dots
The EPL2 language consist of commands. The Q
Command sets the form length using the p
1
, p
2
and
p
3
values.
To set the Q command:
4. Open any text editor and open your format. Look
for the line that starts with Q (Q Command).
5. Type in the dot values for p
1
and p
2
.
For example:
Q160,24
6. Save file. Send format to your printer.
Label
Sensing the Supplies C-3