Avery Dennison 9414 Equipment Manual - Manual (Page 25)

C A R E & M A I N T E N A N C E
3
This chapter tells you how to
◆
clear label jams.
◆ clean the printhead.
C l e a r i n g L a b e l J a m s
When you are printing and a jam occurs, the indicator
light turns ORANGE.
To clear the jam:
1. Turn the printer off.
2. Press the cover release buttons (on both sides of
the printer) towards the front of the printer. Lift
open the cover.
3. If necessary, remove any supply that has been
previously loaded by pushing out the supply holder
tabs. The supply should lift out of the printer.
4. Remove the jammed labels.
5. Reload the supply. See Chapter 2, "Loading
Supplies."
6. Close the cover until the cover locks in place.
7. Press the FEED button to clear the error. The
indicator light should turn GREEN.
Care & Maintenance 3-1