Avery Dennison 9406 Equipment Manual - Manual (Page 30)

7. Lift both ribbon reels by the wire clip and move both ends
of the ribbon away from the printer.
8. Remove wire clips from the ribbon, and put them back on
the reels.
9. Load the supplies you want to use. See "Loading or
Changing Supplies" for more information.
10. Close the printhead latch.
11. Close the printhead lever.
12. Close the exit chute door.
13. Close the printer cover.
14. Turn on the power.
Ribbon
Take-up
Reel
Ribbon
Delivery
Reel
Printhead
Latch
9406 Equipment Manual
2-10