Avery Dennison 9406 Equipment Manual - Manual (Page 20)

5. Press
E
. You will see the previous setting, for example,
SUPPLY TYPE
Indexed
6. Press
R
or
L
until you see the option you want. Then
press E . The printer will calibrate to check the supply
and you will see
SUPPLY
Supply Type
7. Press Q to exit to the Setup menu.
8. Press
Q
to exit to the Main Menu.
NOTE: After changing settings in the Setup Menu, always
return to the Main Menu before turning your
printer off. Changes to these menus will not be
saved if you turn the printer off before returning to
the Main Menu.
9406 Equipment Manual
1-14