Avery Dennison 7410 Network Card Setup Guide - Manual (Page 2)

2
3. Press Enter/Pause to select the internal port. After setting the port to
internal, change the MODE to enable bi-directional communications.
4. Press or until you see
PARALLEL COMM
Mode
5. Press Enter/Pause. You will see
MODE
Compatible
6. Press to display the other option, IEEE1284 and press Enter/Pause.
This selects IEEE1284 for bi-directional Ethernet communications.
(Compatible mode is used with a computer connection and a parallel
cable.) If you want to use the parallel port, set the Port to “External.”
Ethernet Port
Parallel Port
Serial Port
Antenna