Avery Dennison Monarch 9860 Programmer Manual Addendum - Manual (Page 6)

6
B6. column Distance from the lower left edge of
the print area to the pivot point.
Use the previous table for values.
Allow a minimum of 1/10 inch
bet ween the scan edge of bar code
and label edges or other data.
B7. font Bar code type. Use 37.
B8. density Bar code density. The default is 2.
Select the density from the following
table.
Bar Code
Type Density
Selector 203 dpi
Element Size
(dots/mils)
300 dpi
Element Size
(dots/mils)
Data
Length Char
Set
Aztec 2 0.0099 0.010
3 0.0148 0.0133
4 0.0197 0.0167
5 0.0247 0.0233
6 0.0296 0.0266
7 0.0345 0.0333
8 0.0394 0.0366
9 0.0444 0.0433
10 0.0493 0.0466
11 0.0542 0.0533
12 0.0592 0.0566
13 0.0641 0.0633
14 0.069 0.0666
15 0.074 0.0733
0-2710 00H to
FFH
B9. height Bar code height, in 1/100 inches, 1/10 mm, or dots.
Use 0.
B10. text Appearance of text with bar code. Options:
0
Default
8 No text, bar code only
B11. alignment Alignment of bar code data in the field. Use L (left).
C o l