Avery Dennison Sierra Sport4 9493 Quick Reference - Manual (Page 8)

8
C l e a r i n g L a b e l J a m s
When you are printing and a jam occurs, a supply error message
appears. To clear the jam:
1. Turn off the printer.
2. Open the printer and remove the supply roll.
3. Remove the jammed supplies with your fingers.
Note: Do not use sharp objects to remove jammed labels.
This damages the printer.
4. Moisten a soft cloth or cotton swab with isopropyl alcohol and
clean any adhesive from the platen roller. Turn the platen roller
with your finger to clean the entire surface. Allow the platen
roller to dry.
5. Reload the supply and close the printer.
6. Turn on the printer.
C o m m o n E r r o r s
To clear an error, press A under X.
Error Description/Action
411
Framing Check the cable/Call your System Administrator.
418
Noise Check the cable/Call your System Administrator.
611
Loading Font or bar code in the batch does not match the format.
704 – 753
Supply Check supply tracking, marks, black mark sensor
position, and roll for binding. Change supply.
Refer to the Operator’s Handbook for more troubleshooting
information and for any error messages not listed here.
C o n f i g u r i n g t h e P r i n t e r
For information on configuring the printer, creating formats, and
downloading files, visit our Web site.