Avery Dennison FreshMarx 9415 Operator Handbook - Manual (Page 9)

I n s t a l l i n g t h e P r i n t e r
To install the printer on the wall:
1. Select a suitable location for the printer on a wall.
2. Tape the wall mount template to the wall in the
selected location.
Caution: The template must be level or the printer
will not install correctly.
3. Install the four wall anchors according to the four
outside holes indicated on the template.
M o u n t i n g h o le s i n ba c k o f p r i n te r
4. Remove the template.
5. Lower the supply door on the printer so you can
see the mounting holes on the back of the printer.
6. Attach the printer to the wall anchors using the
corresponding holes on the back of the printer.
7. Press down firmly on the printer to lock it in place.
8. Close the supply door.
Getting Started 1-3