Avalon Firestyles DVL Insert-1998 to 2001 - Manual (Page 7)

Installation
(for qualified installers only)
5
Travis Industries
4 0 1 1 0 2 5
9 3 5 0 8 1 0 4
Features:
- Works During Power Outages (millivolt system)
- High Efficiency
- Optional Thermostat or Remote Control
- Realistic "Wood Fire" Look
- Quiet Blower for Effective Heat Distribution
- Convenient Operating Controls
- Variable-Rate Heat Output
- Low Maintenance
Installation Options:
- Residential or Mobile Home
- Fireplace Insert
- Masonry or Zero Clearance
(Metal) Fireplace
Heating Specifications:
Natural Gas Propane
Approximate Heating Capacity (in square feet)* 600 to 2,000 600 to 2,000
BTU Input Per Hour (from high to low) 21,700 to 40,000 23,200 to 40,000
BTU Output on High (with blowers on) 31,560 32,400
Efficiency** (with blowers on) 78.9 % 81.0 %
AFUE (Annual Fuel Utilization Efficiency) 71.0 % 73.7 %
* Heating capacity will vary with floor plan, insulation, use of power heat vent, and outside temperature.
** Efficiency rating is a product thermal efficiency rating determined under continuous operation
independent of installed system.
44-3/16"* 8x10 Arch/Rect. Panels
48-3/16"* 10x13 Rect. Panels
* Includes trim & standoffs
17-3/8"
See the section "Vent Requirements"
for vent location.
32-1/4"
16"*
1-5/8"*
23-34/"
33-3/8"* 8x10
Arch/Rect.
Panels
36-3/8"* 10x13
Rect. Panels
Fuel:
This heater is designed either for natural gas or for propane. Check the sticker on top of
the gas control valve or check with the installer to verify gas use.
Compliance:
This unit has passed the ANSI Z21.88 – 1998, CSA 2.33 M98 Vented Gas Fireplace
Heater Standard as tested by OMNI-Test Laboratories, Inc. Beaverton, Oregon.