Auto-Zone Control Systems ZoneView Plus Software Manual (Version 01C) - Manual (Page 18)

ZoneView Plus
12 Computer Front End
The screen above shows a Zone Controller resides at the first controller address. This
description can be manually changed to reflect the unit location or whatever other
information you deem appropriate for identifying the unit installed at this address.
As you can see from the above screen, a window with a list of units popped open when
you right clicked with the mouse on the Unit #1 description. You can see that a
Fahrenheit version of the Pressure Dependent Zone Controller was the selected unit at the
Loop #1, Unit #1 address.