Dolby Laboratories SDV-27 - Manual (Page 30)

30
Using the battery
Recharging the battery pack
1 Connect the output plug of AC / DC adapter to the battery pack.
2 Connect the AC / DC adapter to the power outlet.
ƒ When recharging starts, the recharge LED lights red.
ƒ The recharge LED turns off when recharging is complete. Remove the power cord from the
battery pack.
ƒ Recharging usually takes about 3.5~4.5 hours.
Charge the battery pack fully before using it for the first time.
Caution:
ƒ
Place the battery pack and AC / DC adapter on a flat surface for recharging.
ƒ Do not short-circuit the terminals of the battery pack and AC / DC adapter.
Notes:
ƒ
The battery charger (AC / DC adapter) is compatible with supply voltages between 100 and 240V
AC and can be used universally.
ƒ When you want to use it when travelling abroad, be sure to have a power plug adapter matching
the local power sockets.