Dolby Laboratories SDV-27 - Manual (Page 19)

19
Main unit control section
1 Play / pause button
Press to play. When pressing during playback mode, pause mode is set. Press again to resume
playback.
Keep it pressed for about 1.5 seconds to power on the unit.
2 Stop / off button
Press to stop playback.
Keep it pressed for about 1.5 seconds to turn off the unit (standby mode).
3 Previous / next buttons
Use to locate at the beginning of previous / next tracks or chapters.
Keep it pressed for about 1.5 seconds during playback to switch playing speed of
backwards / forwards through X2, X4, X8, X20.
4 Mode button
Use +/- key to adjust after entering one mode.
BRIGHTNESS: level 0 to 8.
COLOUR: level 0 to 8.
TFT MODE: switches screen between 16:9 and 4:3.
VIEW MODE: switches screen between reverse and observe.
AV INPUT / OUTPUT: switches the AV function between input
and output.
Keep the button pressed for about 1.5 seconds to turn off
the display, and press it to resume.
5 - /+ buttons
Press to adjust display mode.
6 OPEN button
Press to slide the tray out