Dolby Laboratories SDV-27 - Manual (Page 27)

27
Connecting to a digital amplifier that is not Dolby Digital / DTS / MPEG
compatible
Output the digital signals from the player's digital output to a digital amplifier that is not Dolby / DTS /
MPEG compatible.
Main unit left panel
See picture:
Connecting to a TV
Optical digital cable
(not included)
To digital audio
input jack
Notes:
Carefully check the player's digital output settings before connecting the player to an amplifier equipped
with a digital audio input jack which is not Dolby Digital / DTS / MPEG compatible.
Do not play DVDs when the audio settings are not correct. This may cause excessive noise and
damage your speakers.