Artesyn ViewCheck on ATCA-9405 Installation and Use (November 2014) - Manual (Page 50)

Commands Execution
ViewCheck on ATCA-9405 Installation and Use (6806800S51F) 50
Example
BSF(diag-SP_VEE0)#purge-log logFileName NETWORK_base1.log
Purge Log Success
4.2.10 set-log-level
set-log-level
command sets the current log level of ViewCheck to value ’X’. This is an
internal debug command, used mainly for generating detailed debug log information. The
valid log level values are listed in the following table:
Syntax for CLI
set-log-level logLevelValue
The following table lists the set-log-level command argument.
You can purge only raw log files. The raw log file naming convention is in the form of *.log.
Table 4-5 set-log-level Values
Values Description
1-Info All logs are logged. Even functions like entry and exit are also logged.
2- Normal Details of function flows are logged.
3- Critical High level errors are logged.
Table 4-6 set-log-level Arguments
Argument Data Type Description
X Integer Possible values are 3, 2, 1 (3-Critical, 2-Normal, 1-Info).