ARRIS TM602 User Guide - Manual (Page 12)

Home Prev Next Touchstone TM602 Telephony Modem User’s Guide 12
Getting Battery USB Ethernet
Safety Started Installation Installation Drivers Configuration Usage Troubleshooting Glossary
TM602G/H 2-cell Battery Installation and Replacement
This model of the Telephony Modem has the ability to provide battery backup in the
event of a local power loss. The battery backup is not intended to take the place of
AC power. Use this procedure to install and to replace the backup batteries.
Action
1 Insert a finger into the latch opening, press down and pull back on the latch
holding the battery door (on the bottom of the Telephony Modem). Pull the
door toward you. Set the door aside in a safe place.
2 Hold the battery pack so that the guides on the battery align with the slots
on the Telephony Modem and slide the battery into the bay. The diagram on
the left shows the proper orientation.
Note: Batteries will not insert completely into the Telephony Modem if not
oriented correctly. The battery should slide into the bay without significant
force. Line up the slots in the battery bay with the guides on the battery.
Latch
End
Battery Slot
Battery Guide