Analog Way Optimizer HD - OHD888-AG - Manual (Page 6)

QUICK START GUIDE – OPTIMIZER HD
ANALOG WAY EDITION : 03/08
CONNECTIONS:
c Turn OFF all of your equipment before connecting.
d Connect the AC power supply cord to the OPTIMIZER HD and to an AC power outlet.
e Connect your analog VIDEO sources to the TV/HDTV input connector (HD15 or BNC), your digital TV/HDTV DVI
source to the DVI connector and your SDI VIDEO source to the SD/HD-SDI IN connector (BNC).
NOTE: Only one analog source can be connected at one time either on BNC or HD15 connector.
f Connect the digital input of your display devices (flat screen, video projector, digital recorder...) to the corresponding
output connector (DVI-D or SDI of the OPTIMIZER HD).
g Turn ON the OPTIMIZER HD (rear panel switch). Then turn ON your input source and then your display devices.
NOTE: The GENLOCK IN & LOOP connectors are available on the OHD888-AG model only.
• Example of connection (Model: OHD888-AG):
2
5
4
4
3 3
3
OR
• Analog TV/HDTV source connection:
RGBS video Component (Y, Cr, Cb) or S.VIDEO (Y/C) source Composite Video
source connection RGsB source connection connection source connection
SETTINGS:
c We recommend resetting the OPTIMIZER HD to its default values, with the front panel display menu
(CONTROLDefault valueyes) before proceeding.
d Select the input type of the source connected to the input connectors with the front panel display menu (INPUTDVI
or SDI or Analog type) and activate the Auto detect function. The Auto detect function detects and selects
automatically the input type and format.
e Select the Input status menu (INPUTInput status) to verify the correct detection of the type and format of your input
source. If a wrong message is displayed, select manually the type of your input source (INPUT---).
f Select the output format and rate (OUTPUTFormat). For the DVI-D output, select the color space (RGB/YUV) and
the range (0>255 or 16>235).
g Select the needed image adjustments (brightness, color…) available on the front panel and in the IMAGE menu.