Analog Way Optimizer HD - OHD888-AG - Manual (Page 15)

OPTIMIZER HD Chapter 3 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued)
PAGE 15
3-5. FUNCTIONS DESCRIPTION
[INPUT]
[Input status]
Indicates the status of the selected input.
[DVI Input]: DVI input selection.
Select the DVI input type between one of the following items:
[DVI RGB 0/255]
[DVI RGB 16/235]
[DVI YUV]
[ SDI Input] : SDI input selection.
[ Analog Input]
Select the Analog input type between one of the following items:
[auto detect]: The input format is automatically detected.
[ SDTV Composite]
[ SDTV Y/C]
[ Video RGBS]
[ Video RGsB]
[ Video YUV]
[H sync load]
Select the Horizontal sync load of your input signal.
[VCR mode]
This function allows improving the image contour of low quality VHS tapes.
[OUTPUT]
[Status]
Displays the output status.
[ Output format]
Output format selection.
[Genlock]: Output format synchronized onto the signal connected to the genlock input.
[480i] [576i]
[480p] [576p]
[720p] [1035i]
[1080i] [1080p]
[ Output rate]
Output rate selection.
[23.97 Hz] [24 Hz] [25 Hz]
[29.97 Hz] [30 Hz] [50 Hz]
[59.94 Hz] [60 Hz]
[Frame lock]: The output frame rate is synchronized onto the frame rate of the signal connected to the
genlock input.
[ Output DVI]
Select one of the following output type.
[DVI components]: Then select RGB or YUV.
[DVI dynamic]: Then select 0-255 or 16-235.
[Test pattern]
Select one item.
[Off]: turns OFF the test pattern.
[Grey Scale]: Displays onto the output a grey scale pattern.
[Color bar]: Displays onto the output a color bar pattern.
[Grid]: Displays onto the output a grid pattern.