Analog Way Optimizer HD - OHD888-AG - Manual (Page 12)

OPTIMIZER HD
PAGE 12
Chapter 3 : FRONT PANEL DISPLAY MENU DESCRIPTION
3-1. INTRODUCTION
The front panel display menu presents 2 modes: the STATUS MODE and the CONTROL MODE.
• The STATUS MODE indicates the input and output status of the device.
• The CONTROL MODE allows selecting and adjusting the parameters of the device.
3-2. CONTROL BUTTONS
The front panel display is controlled by 2 buttons and 1 knob:
knob: • In the CONTROL MODE, turn this knob to scroll thru the different menus.
• In the SATUS MODE, turn this knob to adjust the audio level.
ENTER button: • From the STATUS MODE, press this button to enter in the CONTROL MODE.
• From the CONTROL MODE, press this button to confirm a selected item.
EXIT / MENU button: • From the STATUS MODE, press this button to enter in the CONTROL MODE.
• From the CONTROL MODE, press this button to:
- return to the previous menu without safeguarding the selection.
- return to the STATUS MODE.
3-3. STATUS MODE
ANALOG WAY
DEVICE STATUS
OPTIMIZER HD
[Input] INPUT STATUS
c Format: NTSC
d Rate: 59.94 Hz
e Line: 15.74kHz
[Output] OUTPUT STATUS
f Format: 1080i
g Rate: 50.00 Hz
h Source: Internal
c INPUT FORMAT
d INPUT VERTICAL FREQUENCY (in Hz).
e INPUT HORIZONTAL FREQUENCY (in kHz)
f OUTPUT FORMAT.
g OUTPUT RATE
h RATE SOURCE