1 usage, 2 detailed command sequence – Analog Way MIDRA PLATFORM TPP Current Programmer's Guide User Manual
Page 25

25
PROGRAMMER'S GUIDE FOR v01.02.11
3.8 Displaying/Hiding the Quick Frame for one single screen
3.8.1 usage
The Quick Frame is the emergency frame that can be displayed in front of every layer for a given
screen. This example shows how to enable the Quick Frame for Screen 1.
3.8.2 detailed command sequence
Displaying the Quick Frame
Syntax :
Answer : CTqfa
1
C
R
L
F
1 indicating that the frame configured as the Quick Frame for
now displayed above all layers.
Hiding the Quick Frame
Syntax :
Answer : CTqfa
0
C
R
L
F
0 indicating that the frame configured as the Quick Frame for
now hidden.
3.9 Displaying/Hiding the Quick Frames for all screens (matrix mode)
3.9.1 usage
Two different frames can be defined as Quick Frames (or emergency frames) respectively for screen 1
and screen 2. This example shows how to enable the configured Quick Frames simultaneously on Screen 1
and Screen 2.
3.9.2 detailed command sequence
Displaying the Quick Frames on both screens simultaneously
Syntax : 1CTqfl
Answer : CTqfl
1
C
R
L
F
1 indicating that the Quick Frames configured for Screen 1 and Screen 2 are now
displayed above all layers on both screens.
Hiding the Quick Frames on both screens simultaneously
Syntax : 0CTqfl
Answer : CTqfl
0
C
R
L
F
0 indicating that the Quick Frames configured for Screen 1 and Screen 2 are now
hidden on both screens.