Adamson S-Series - Manual (Page 9)

Page 9
Introduction & Product Details
S119 | Spec Sheets
1.4 S119 Spec Sheet
Specifications
S119
The S119 Subwoofer is the companion subwoofer to the S10. The
enclosure is loaded with a light weight, long excursion, 19” ND19 Kevlar
Neodymium driver utilizing Adamson’s Advanced Cone Architecture
and a 5” voice coil for exceptional power handling. It is mounted in an
ultra-efficient front-loaded enclosure, designed to reproduce clean,
musical low frequency information.
The cabinet construction uses marine grade birch plywood as well as
aircraft grade steel and aluminum, and is equipped with Speakon™ NL8
connectors. The integrated rigging system matches the rigging for the
S10 and can be flown or stacked in the same array without the need for
an adapter frame.
Frequency Range (+/- 3dB) 30 Hz - 80 Hz
Maximum Peak SPL** 138 dB
Components LF ND19 19” Kevlar Neodymium Driver
Nominal Impedance LF 8 Ω
Power Handling (AES / Peak) LF 1200 / 4800 W
Connection Speakon™ NL8
Height Front (mm / in) 543.5 / 21.4
Width (mm / in) 742 / 29.2
Depth (mm / in) 630 / 24.8
Weight (kg / lbs) 56.7 / 125
Supported Processing Lake
742 mm / 29.2 in
630
mm
/ 24.8
in
543.5
mm
/ 21.4
in
**12 dB crest factor pink noise at 1m, half space, using specified processing and amplification