Adamson S-Series - Manual (Page 22)

Page 22
3.4 Attaching the Rigging Frame
Rigging
S-Series | Rigging
WARNING
SAFETY RISK
PAY SPECIAL ATTENTION
PINCH POINT
CAN CAUSE SEVERE
PERSONAL INJURY
Fig. 5
Fig. 6
5. Set the rear rigging of the top enclosure to rigging position 4. (Fig. 5)
6. Remove the rear link pins from the S-Series Support Frame and
lower the frame onto the rear rigging pieces. (Fig. 6)
7. Place the rear link pin to affix the S-Series Support Frame (Fig. 7)
Fig. 7
8. The S-Series Support Frame is now attached and ready for plate
configuration. (Fig. 8)
Fig. 8