Adamson S-Series - Manual (Page 27)

Page 27
3.7 Ground Stacking
Rigging
PINCH POINT
CAN CAUSE SEVERE
PERSONAL INJURY
WARNING
SAFETY RISK
PAY SPECIAL ATTENTION
Fig. 9
Fig. 10
10. With the enclosure still lifted, press in and turn the stacking pins on
either side of the enclosure clockwise. (Fig. 10)
11. With the stacking pins engaged, the array will maintain the intended
angles. (Fig. 11)
Fig. 11
12. Repeat as needed to reach the desired enclosure count. (Fig. 12)
Fig. 12
9. Set the proper angle by first lifting the S10 cabinet to it’s maximum
height, either by hand or with a hoist. (Fig. 9)
S-Series | Rigging