Zilog Z80380 - Manual (Page 33)

UM004001-COR1103 1–21
Introduction Technical Support
Download a HEX file
Perform the following steps to download a HEX file into the EEPROM memory on top of the
debug monitor program.
1. Type L at the debug monitor prompt. The user is prompted to begin downloading the file.
2. Select Send Text File from the Transfer menu.
3. Browse to the project directory and select the HEX file that was created when the C-file
was compiled
4. Click Open. The file is downloaded to the board. The download process can take up to two
minutes.
5. After the file is downloaded the debug monitor returns a result. If the monitor does not
return a result after 3 minutes, press Ctrl and Esc to exit the process and try again.
6. Type G at the debug monitor prompt. The user is prompted to enter a start address .
7. Enter a start address of 2100. The downloaded program should begin running.
TECHNICAL SUPPORT
Technical support for ZDS or the C-Compilers can now be accessed on the web at
http://www.zilog.com.
To get the latest software upgrades for ZDS or 380 C-Compiler, go to the home page and
select Downloadable Software from the main menu.