Zilog Z80380 - Manual (Page 18)

Sample Session Introduction
1–6 UM004001-COR1103
SAMPLE SESSION
The 380 C-Compiler is a modular component that is part of the ZDS development environ-
ment. Users should become familiar with ZDS and configure the settings before program-
ming or downloading files. This chapter orients the user on using ZDS and configuring the
compiler for the 380 family of processors. For more information on installing ZDS, consult
the ZDS Quick Start Guide or the ZDS on-line help.
C REATE A PROJECT AND S ELECT A P ROCESSOR
The user must create a project and select a processor before creating or opening a C-file. Per-
form the following steps to create a new project and select a processor:
1. Open ZDS by selecting Start>Programs>Zilog Developer Studio> ZDS.
2. Choose New Project from the File menu. The New Project dialog box appears. See
Figure 1-2.
F IGURE 1-2. N EW P ROJECT DIALOG BOX
3. Select Family in the Selection by field.
4. Select Z380 from the Master pop-up list.
5. Select the processor from the Project Target pop-up list.
6. Select an emulator or simulator from the Emulator pop-up list.
7. Click on the browse button (...) in the Project Name field. The New Project Browse dialog
box appears.
8. Enter the file name and select a path in the New Project Browse dialog box.