Xtramus NuDC-4U V2.1 - Manual (Page 31)

31
5.5. Main Display Screen
The Main Display Screen displays real-time power status in curves, while Voltage/Ampere/Watt serves
as each curve’s Y-Axis, and time as its X-Axis. There are four different modes for the Main Display
Screen , which are: One Chart Mode, Four Charts Mode, Two Charts Mode, and Parallel Connection
Mode
. For more information, please refer to “5.2.5. Window A/B/C/D”.
You can change the location of Cursor 1 and Cursor 2 on the Main Display Screen. Move the
mouse on the cursor you would like to move. Your mouse will change to “ÅÆ” icon as shown in
the figure at right. Left-click and hold your mouse so you can move Cursor 1 or Cursor 2 to the
location you wants.
5.6. Power Test Status
The Power Test Status icon located on the upper-right part of NuDC-4U utility software changes
whenever alarm has occurred during power test as shown in the table down below:
No alarm has occurred.
An alarm has occurred.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®