Xtramus NuApps-2889-RM V1.1 - Manual (Page 34)

34
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®
4.2.2. Forwarding
Choose your port pair
To choose your port pair, please choose a port from Source Ports and Destination Ports, than click
the button to confirm the selection, in which the chosen port pair will be listed in the right
field. To undo a port pair selection, please select the port pair from the right field, than click the
button to cancel the selected port pair.
You can also click the button to cancel all the selected port pair.
Besides, you can choose the task in Non-mesh, partial mesh or full mesh by scrolling down the
field on the top right.
You can also click the button to cancel all the settings you made on the
Forwarding task window.
*Note: each port is labeled as (x, y, z), where “x” is the number order of the NuStreams-2000i/600i, “y” is the
number order of chassis slot and “z” is the number order of port of each module card.