Port a / port b, Media type, capture criteria, loopback and alarm, Media status – Xtramus DApps-TAP V1.3 User Manual

Page 48

7.3.3. Port A / Port B

7.3.3.1. Media Type, Capture Criteria, Loopback and Alarm

By clicking the Port A or Port B on the System Info/Configuration List, the Port A or Port B
Configuration screen will be shown on the Main Display Screen located on the right side of
DApps-TAP’ main window, allowing you to make settings for NuDOG-301C /801/101T ports.

Those settings include the Media Type, Capture Criteria, Loopback and Alarm related to

and

. Besides, the change on the status of Media Type, Capture Criteria, Loopback and Alarm are

also shown in the System Info/Configuration.

For more detail description about Port A or Port B Configuration, please refer to 7.2.5. Port AB

7.3.3.2. Media Status
By clicking the Media Status on the System Info/Configuration List, it will show the status of Link,
Speed, Mode, Type, Flow Control and Rate Control.

E-mail: [email protected]

Website: www.Xtramus.com

XTRAMUS TECHNOLOGIES